Preparation of shish‐kebab and nanofiber polyethylene with chromium/Santa Barbara amorphous silica‐15 catalysts

Cr/SBA‐15 catalysts were prepared by the grafting of chromium nitrate nonahydrate [Cr(NO₃)₃·9H₂O] complexes onto SBA‐15 mesoporous materials. Shish‐kebab and nanofiber polyethylenes (PEs) were prepared under different temperatures via ethylene extrusion polymerization with the Cr(NO₃)₃·9H₂O catalytic system. The diameter of a single nanofiber was 100–250 nm. Scanning electron microscopy images showed that the polymer obtained from the SBA‐15‐supported catalyst under different polymerization temperatures produced nanofiber and/or shish‐kebab morphologies. X‐ray diffraction and differential scanning calorimetry were used to characterize microstructures of the materials. Polymers obtained with all of the catalysts showed a melting temperature, bulk density, and high load melt index; this indicated the formation of linear high‐density PE. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Stochastic modeling and generation of synthetic sequences of hourly global solar irradiation at Quetta, Pakistan

Using hourly global radiation data at Quetta, Pakistan for 10 yr, an Autoregressive Moving Average (ARMA) process is fitted. Markov Transition Matrices have also been developed. These models are used for generating synthetic sequences for hourly radiations in MJ/m² and that the generated sequences are compared with the observed data. We found the MTM approach relatively better as a simulator compared to ARMA modeling.     

Glassy carbon electrode modified with a bilayer of multi-walled carbon nanotube and polypyrrole doped with new coccine: Application to the sensitive electrochemical determination of Sumatriptan

A promising electrochemical sensor was developed based on a layer by layer process by electro-polymerization of pyrrole in the presence of new coccine (NC) as dopant anion on the surface of the multi-walled carbon nanotubes (MWCNTs) pre-coated glassy carbon electrode (GCE). The modified electrode was used as a new and sensitive electrochemical sensor for voltammetric determination of sumatriptan (SUM). The electrochemical behavior of SUM was investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results showed a remarkable increase (∼12 times) in the anodic peak current of SUM in comparison to the bare GCE. The effect of experimental variables such as, drop size of the casted MWCNTs suspension, pH of the supporting electrolyte, accumulation conditions and the number of cycles in the electro-polymerization process on the electrode response was investigated. Under the optimum conditions, the modified electrode showed a wide linear dynamic range of 0.02–10.0 μmol L⁻¹ with a detection limit of 6 nmol L⁻¹ for the voltammetric determination of SUM. The prepared electrode showed high sensitivity, stability and good reproducibility in response to SUM. This sensor was successfully applied for the accurate determination of trace amounts of SUM in pharmaceutical and clinical preparations.     

Synthesis of versatile TIPNO-based alkoxyamines

The versatile chloromethyl TIPNO-based alkoxyamine was efficiently transformed into other valuable functionalised TIPNO-based alkoxyamines such as amino alkoxyamines which are interesting initiators for block copolymers and bisalkoxyamines in good yield and in two steps at the most. One bisalkoxyamine has allowed to prepare well-defined polystyrene-b-poly(n-butyl acrylate)-b-polystyrene symmetrical triblock copolymer. The last representative example of such alkoxyamines is a styrenic alkoxyamine which was copolymerized with styrene to afford branched polystyrene. Finally, for the first time branched poly(n-butyl acrylate) by nitroxide mediated radical polymerization was obtained and was a efficient macroinitiator of styrene, which indicates that the radical polymerization mediated by this styrenic alkoxyamine is living.     

Mathematical modelling of mass transfer in the concentration polarisation layer of flat‐sheet membranes during clarification of pomegranate juice

Evaluation of membrane clarification of pomegranate juice showed that a cake layer is created at the beginning of the process. This evaluation was used as the basis for modelling the solute concentration in the concentration polarisation layer to control the fouling of the membrane. The model of changes in concentration as a function of time and distance (in its dimensionless form) was solved numerically using the Forward‐Time/Central‐Space (FTCS) method. Programming was performed using MATLAB software, and the predicted concentration on the membrane surface was compared with experimental data; the prediction fit well with the experimental data. The model showed that the solute concentration increased as distance to the membrane surface decreased, time increased, transmembrane pressure increased and velocity decreased. Also, the model matched the experimental data in that it showed the cake layer to be created in the early stages of the membrane clarification process.     

Optimization of the water-based road-marking paint by experimental design, mixture method

The main purpose of this research is formulating and optimizing a new road-marking paint which is an environmentally friendly product. This paint is produced with an emulsion of an acrylic copolymer and contains the least of the volatile organic compounds. The formulation and optimization procedure is carried out on the base of experimental design by the method of mixture in which the important paint properties are modeled by using special cubic model. The present method has the capability of investigation the effect of raw materials at different levels with fewer experiments than factorial and fractional factorial design.

In this research, the main parameters such as resin, pigment and filler were selected at different levels, and different samples were prepared by combination of additives and other required reagents. The properties of wet and dry films of the samples were determined using ASTM test methods. Different responses such as pigment volume concentration (PVC), latex critical pigment volume concentration (LCPVC), abrasion resistance, hardness, gloss, no pick up time and surface drying time, were selected as the objective functions of this study. By running DX6 software, using special cubic model and selection of desired range of end-use properties, the region of optimum paint formula was determined.

The accuracy of the model was examined by preparing a sample in optimized region and by determining its final properties, experimentally. The results exhibit a good agreement between the model and experimental measurements. This product was compared with commercial solvent based traffic paint and good quality was reported in end-use properties.     

Heat capacities of aluminium alloys

In the framework of the European COST 507 project the specific heat capacities of aluminium alloys and metal matrix composites based thereon have been measured between 20 and 520 °C by differential scanning calorimetry and stored in the databank THERSYST along with other thermophysical properties mainly drawn from literature. The curves show the influence of additional elements and reinforcements, of the fabrication process, thermomechanical treatment and scanning rate on the precipitation and dissolution kinetics of the various metastable phases and their relative amounts. The database may be used to select existing light alloys or elaborate new ones in view of specific technical applications.Dedicated to Professor Dr. Hans Löffler on the occasion of his 72nd birthday.     

Adult age differences in episodic memory: Further support for an associative-deficit hypothesis.

This study further tested an associative-deficit hypothesis (ADH; M. Naveh-Benjamin, 2000), which attributes a substantial part of older adults' deficient episodic memory performance to their difficulty in merging unrelated attributes-units of an episode into a cohesive unit. First, the results of 2 experiments replicate those observed by M. Naveh-Benjamin (2000) showing that older adults are particularly deficient in memory tests requiring associations. Second, the results extend the type of stimuli (pictures) under which older adults show this associative deficit. Third, the results support an ADH in that older adults show less of an associative deficit when the components of the episodes used are already connected in memory, thereby facilitating their encoding and retrieval. Finally, a group of younger adults who encoded the information under divided-attention conditions did not show this associative deficit. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Study and characterization of porous copper oxide produced by electrochemical anodization for radiometric heat absorber

The aim of this work is to optimize the different parameters for realization of an absorbing cavity to measure the incident absolute laser energy. Electrochemical oxidation is the background process that allowed the copper blackening. A study of the blackened surface quality was undertaken using atomic force microscopy (AFM) analysis and ultraviolet-visible-infrared spectrophotometry using a Shimadzu spectrophotometer. A two-dimensional and three-dimensional visualization by AFM of the formed oxide coating showed that the copper surfaces became porous after electrochemical etching with different roughness. This aspect is becoming more and more important with decreasing current density anodization. In a 2 mol L ^-1 of NaOH solution, at a temperature of 90°C, and using a 16 mA cm² constant density current, the copper oxide formed has a reflectivity of around 3% in the spectral range between 300 and 1,800 nm. Using the ‘mirage effect’ technique, the obtained Cu₂O diffusivity and thermal conductivity are respectively equal to (11.5 ± 0.5) 10 to 7 m² s^-1 and (370 ± 20) Wm^-1 K^-1. This allows us to consider that our Cu₂O coating is a good thermal conductor. The results of the optical and thermal studies dictate the choice of the cavity design. The absorbing cavity is a hollow cylinder machined to its base at an angle of 30°. If the included angle of the plane is 30° and the interior surface gives specular reflection, an incoming ray parallel to the axis will undergo five reflections before exit. So the absorption of the surface becomes closely near 0.999999.